Similar in size and design to the DBS-10A, the DBS-11A employs a Flat-Bar design to service size PE pipe with a less than smooth interior surface finish.
The flat-bar design applies more contact area on the pipe and produces a larger sealing surface. HIgher hand torque is required and limits the tool range to 3/4” IPS maximum. Gap stops are welded to the upper jaw and grease fittings are provided for power screw and thrust bearing lubrication.
Static electric grounding is accomplished using a SEG-30 Grounding Rod attached to the upper jaw
| Weight: | 5lbs. |
| Dimensions: | 8” Height |
| Capacity: | Specify (1) Size (see table) |
| Order Parts: | DBS-11A Replacement Parts |
 |
DBS-11A Product Sheet |
| |
DBS-11A Parts Diagram |
 |
||||
| Pipe Size | Nominal Wall Thickness | SDR | Gap Stop | %Max Squeeze |
|---|---|---|---|---|
| CTS 1/2” | .090 .104 |
7 6 |
.147 .172 |
22 21 |
| CTS 3/4” | .077 .090 |
11 9.7 |
.125 .155 |
24 18 |
| CTS 1” | .090-.101 | 11-12.5 | .155 | 29 |
| CTS 1-1/4” | .090 .121 |
15 11 |
.155 .210 |
21 19 |
| IPS 1/2” | .090 | 9.3 | .155 | 18 |
| IPS 3/4” | .095 | 11 | .155 | 25 |